STANDARD FITTINGS
4-prong-mandrel MT2 D=25 mm
for spindle/headstock
4-prong mandrel MT 2 D=35 mm
For spindle/headstock
Live centre MT2/60 °
For tailstock quill
Live centre MT2/with pressring D=20x26 mm
For tailstock quill
Indexing Pin
Mounted fix at spindle nose
never use the indexing pin for locking the spindle!
Tool Rest bottom part
Tool Rest 350 mm
Toolbox with rubber mat
Center knock-out-rod
For prong mandrel
Pin
To loosen chucks
TECHNICAL SPECIFICATIONS
Centre height
280 mm
Distance between centres
850 mm standard
optional 1500 mm with 2
nd
short bed/3
rd
foot
optional 2300 mm with 2
nd
long bed/4 feet
Swing over bed
560 mm
Swing with outrigger 900 mm appor.
Spindle thread
M 33 with centering collar, inner cone MK 2
Spindle bearing 2 angular ball bearings front , 1 ball-bearing rear
Indexing System integrated indexing system with scale
Spindle speed rpm
3steps: 40-850 80-1645 125-3025 rpm/min.
Max. permissible workpiece D
500 220 130 mm
Tailstock
MK 2 quill taper, stroke 135 mm with scale
Spindle motor
400 V/3 ph/2,2 kW/50 Hz/ connected value B16A
inverter electric mains 230 V/1 ph/50 Hz
Vee-belt
poly-vee-belt 10PJ 711
Electrical system
with undervoltage and overload protection
Security/Interruption switch inside of vee-belt cover
CEE-Plug 17A, connected 1x230 V electric mains
.
Dimensions L/W/H
185 x 60 x 125 cm max.
Weight
440
–510 – 590 kg (depending on centre distance)
Paint
grey-white RAL 9002/anthrazit RAL 7016
Warranty
1 year
Subject to change without notice
The machine meets the safety requirements and is CE-conform
