Steiner MD448 Скачать руководство пользователя

Страница: 4 / 38

ROTARY

MOWER

INTRODUCTION

DESCRIPTION

A full-floating rotary mower deck is designed to fit all Steiner power units with the quick hitch front lift.

Three sizes match the power unit to the application. These decks are easy to attach and detach allowing

interchange with the many other front mounted attachments. The side discharge rotary mower provides

even distribution of clippings while the full-floating deck follows the contours of the terrain for an even cut

with cutting height controlled by the front caster wheels and full width rear roller. The deck can be safely

serviced and cleaned while still attached to the tractor. Convenient handles enable the deck to be lifted

vertically over 90 degrees so the blades are fully exposed. Exceptional visibility and maneuvering is

possible with this front mounted design mower.

NOTE: The flip-up deck feature was added

beginning with the following Serial Numbers:

75-70855 ----------------------- 1494

75-70860 ----------------------- 4728

75-70865 ----------------------- 1970

Содержание MD448







































Результаты поиска

Содержание MD448

Отзывы:

Похожие инструкции для MD448

Бренды по названию

Популярные бренды

Steiner MD448, Руководство оператора и иллюстрированный список запасных частей

Результаты поиска

Содержание MD448

Отзывы:

Похожие инструкции для MD448

Бренды по названию

Популярные бренды