STEINEL NM 5000-3 DAL, Информация

Страница: 13 / 17

24 25
9� Technical specifications
Dimensions (H x W x D) Surface-mounted installation, round
Ø 126 × 56 mm
Surface-mounted installation, square
95 × 95 × 41.5 mm
Concealed installation, round
Ø 124 × 51 mm
Concealed installation, square
94 × 94 × 51 mm
Mains power supply 220-240 V, 50 / 60 Hz max. 2.5 mm 2
Angle of coverage diffuse
Sensor technology Photo diode
DALI output 2-core DALI control cable / broadcast
Twilight setting 2-1000 lux + teach mode
Manual override
(permanent light)
selectable (4 h)
IP rating Surface-mounted: IP54
Concealed: IP20
Temperature range -20°C to +50°C
Controllable DALI
electronic ballasts
30
Malfunction Cause Remedy
NightMatic 5000-3 DALI
without power
n
Fuse faulty, not
switched ON, break in
wiring
n
Short circuit
n
New fuse, turn ON
power switch, check
wiring with voltage
tester
n
Check connections
Light does not switch ON
n
Load faulty
n
No power supply
n
Surroundings still
too bright
n
Change load
n
see "NightMatic 5000-3
DALI without power"
n
Wait until ambient light
reaches ON brightness;
if necessary, define
new switch-on value
(using button)
Light does not switch OFF
n
Surroundings not yet
bright enough
n
Wait until it is light
enough; if necessary,
define a new light
ON brightness
(in the evening)
Light does not switch ON in
the morning
n
Function not properly
activated
n
Set function as de-
scribed in "Setting for
morning hours"
Light switches ON or OFF at
unusual times
n
Change from summer
to winter time or vice
versa
n
Switching times
incorrect
n
Sensor near Wi-Fi
or other wireless
communication source
n
Switching times are
geared towards light
levels. Change setting
if necessary
n
Re-define switch-ON
light level (switching
times will be re-com-
puted)
n
install at least 2 m away
from the wireless com-
munication source
10� Troubleshooting
GB