STEINEL PROFESSIONAL US 360 KNX, Информация, Страница: 5 / 6

- 8 - - 9 -
n
This product must only be
installed by a qualified elec-
trician in accordance with
national wiring regulations
as defined in VDE 08 29
(DIN EN 5000 90).
n
Installed improperly, low-
voltage products can cause
extremely serious personal
injury or damage to property.
This product must never be
connected to a 230 V AC
power supply as it is intended
for connection to an extra-
low voltage power supply.
System components
a
Sensor module
b
Metal frame
c
Sensor base
d
Clamping-type ceiling
adapter, concealed box
e
Surface-mounting adapter
f
Locking mechanism
g
Programming button
Operating Instructions
GB
Dear Customer,
congratulations on purchasing
your new STEINEL sensor and
thank you for the confidence
you have shown in us. You
have chosen a high-quality
product that has been manu-
factured, tested and packed
with the greatest care.
Please familiarise yourself
with these instructions before
attempting to install the sensor,
because prolonged, reliable
and trouble-free operation will
only be ensured if it is fitted
and used properly.
We hope your new STEINEL
sensor will bring you lasting
pleasure.
Safety precautions
How it works / basic function
The ultrasonic and DualTech
presence detectors from the
Control PRO range control
lighting as well as heating,
ventilation and air-conditioning,
e.g. in offices, schools, public
buildings or at home,
in relation to ambient light level
and the presence of persons.
The Presence Control is also
distinguished by its low intrinsic
power consumption.
The function to be used (activat-
ed) is defined in the "General
Settings" parameter window
using the Engineering Tool
Software (ETS), version ETS3.f
and higher.
Detection zone
DualTech / US 360, mounting height 2.8 m Single US / Dual US, mounting height 2.8 m
Single US
Dual US
PIR radial and presence detection
PIR tangential detection
US tangential and presence detection
US radial detection of substantial movements
US tangential and presence detection
US radial detection of substantial movements
DualTech
US 360
Electrical installation / automatic mode
The wiring leads selected for
installation must comply with
the regulations laid down in
VDE 08 29 (DIN EN 5000 90)
(see Safety precautions, page 8).
+
+
+
+
+
+
Operation
Note: for an application
description, please go to
www.knx.steinel.de
1. Issue physical address and
generate application program
in the ETS.
2. Load the physical address
and application program into
the presence detector. When
you are prompted, press
programming button
g
.
3. The blue LED goes out once
programming has been
successfully completed.
GB