Operate steps
*
general mode
（
without PC & HDMI display
）
1. Keep press on/off button to turn on the camera (Since the battery can not work for a long
time alone, we advise connect the external power supply when you do some operation)
2. Press “menu” button to do some set up. Use the up&down to choose. And when you finish
that, press “menu” again to quit
3. Press “OK” to record your operation, and “OK” to stop it. During that time, you can press “up”
or “down” to amplify or reduce the view
4. Press “M” button, which means “capture picture”, to get into capture mode, and press “OK”
to capture a picture
5. Press “M” button again to get into “play back mode”. Use the “up” and “down” button to
choose the file you want to check. When you find the file, press “menu” button, you can
delete/protect/slide show the file. Press “M” button again to quit this mode.
(PS: If the file didn’t been “protect”, when the memory card is full, it will be clover by the new
files)
*
HDMI display output mode
1.Connect the microscope with the HDMI
display 2.Rest step just like in general mode
(PS:At this mode, maximum resolution ratio can reach to 1920*1080)
*
USB 2.0 output mode
1.Connect the microscope with the PC
2.On the screen of microscope will show 2 options, PC camera & Mass storage, and choose the
“PC camera”
3.Open the software, the title will show the Storage path.
4.Record a video: Capture
→
start capture
→
OK
→
stop capture
5.The video will automatic be saved as the path which the title shows/ If you want a copy file in
case the next time be coverd by other videos,you can click File
→
save capture video, and change
the name of the file.
6.Capture a picture:
Capture
→
still
→
enae
capture
→
still
→
folder(choose a storage path)
capture
→
snap(capture a picture, or you can just press “Enter” on your keyboard) (PS:
At this USB output mode, maximum resolution ratio can only get to 1080*720P )
STEINDORFF
®
