Steinberg UR816C, Руководство для стартапов

Страница: 13 / 23

Preparation before using with a computer
UR816C Startup Guide
13
Preparation before
using with a computer
The following three setup procedures are
required before you can use the device with
a computer.
• Installing TOOLS for UR-C
• Activating Basic FX Suite
• Downloading Cubase AI (DAW)
Installing TOOLS for UR-C
Download TOOLS for UR-C beforehand
from the Steinberg website. Follow the
steps below to install the TOOLS for UR-C.
NOTE
• You are only permitted to use this software
pursuant to the terms and conditions of the
“License Agreement” shown during the
installation.
• Future upgrades of application and system
software and any changes in specifications
and functions will be announced at the
following website.
https://www.steinberg.net/
• The eLicenser Control Center (eLCC) for
controlling the product license is installed at
the same time.
Windows
1.
Disconnect all USB devices other
than the mouse and keyboard
from the computer.
2.
Start the computer and log on to
the Administrator account.
Exit any open applications and close
all open windows.
3.
Extract the previously downloaded
TOOLS for UR-C.
4.
Double click the [setup.exe] file in
the extracted folder to start the
installation.
5.
Follow the on-screen instructions
to install the software.
NOTE
• While installing the software, the “eLicenser
Control Center” installation message
appears. Follow the onscreen instructions to
install the software.
• You can select the desired software to be
installed on the installation screen.
- Yamaha Steinberg USB Driver
- Steinberg UR-C Applications
- Basic FX Suite (VST3 Plug-ins)
6.
When installation has been
completed, click [Finish].
If a window requiring you to restart your
computer appears, follow the onscreen
instructions and restart the computer.
Confirmation of Installation
7.
Connect the device directly to the
computer by using the included
USB cable.
Make sure not to connect it to a USB
hub.
8.
Turn the switch of the device on.
9.
Open the [Device Manager]
window as follows.
[Control Panel]

([Hardware and
Sound]

) [Device Manager]
10.
Click on the [>] mark next to
“Sound, video and game
controllers.”
11.
Confirm that the device name is
listed
Installation of the TOOLS for UR-C is now
complete.