PLEASE NOTE:
When the mode indicator and the laser beam are blinking
simultaneously, the laser is placed incorrectly or the angle of inclination exceeds
5
o
. Then the device setting should be corrected.
Rotation
Continuous rotation:
1. Press the acceleration button to control the rotation speed.
2. After pressing the button several times, the laser starts rotating successively at
the following speed: 0-60-120-300-600-0 rpm.
Phased Rotation:
1. Use the acceleration button to reduce the rotation speed to 0.
2. Press the right/left rotation button, as appropriate.
Directional scanning
1. Press the directional scan button.
2. After pressing this button several times, the laser will start changing the
scanning angle in the following order: 0° - 10° - 45° - 90° - 180° - 0°.
3. Use the arrows to change the scanning direction.
Tilt angle adjustment
When the device is upright, you need to adjust the X and Y axis tilt angle to
perform a horizontal scan.
1. Press the manual mode button.
2. When the X-axis indicator is on, use the + and - buttons to adjust the tilt angle.
3. Do the same when the Y-axis indicator is on.
4. To return to the automatic levelling mode, press the manual mode button again.
Remote control
The remote control reacts to the infrared.
1. To turn on the remote control, point the remote control at the infrared focus.
2. Use the buttons to adjust the parameters: tilt angle, direction of rotation and
directional scan.
