Steinbach 061340, Руководство пользователя

Страница: 24 / 195

9. Re-insert the screw
19
in the housing (see Fig. C).
10. Turn the solar light
13
clockwise to screw it onto the outdoor unit
14
.
The outdoor unit can be found on channel 1 of the indoor unit.
Indoor unit
Change the batteries in the indoor unit
1
as soon as the battery symbol
11
appears on
the display.
1. Remove the battery compartment cover from the battery compartment
17
.
2. Remove the old batteries.
At delivery there are no batteries in the battery compartment.
3. Insert 2 new AAA batteries.
Always exchange all batteries. Never mix batteries with different charge levels. Use
only batteries that are listed in the "Technical Data" section.
4. Close the battery compartment
17
with the battery compartment cover.
The display elements of the display appear briefly. The measured indoor temperature is
displayed next to the indoor temperature symbol
12
. The signal symbol
9
flashes for
approximately 3 minutes while the indoor unit
1
searches for the signal of the outdoor
unit
14
. As soon as the indoor unit receives the signal from the outdoor unit, the
temperature measured by the outdoor unit
14
is displayed.
Manual transmitter search
The indoor unit
1
occasionally loses the wireless signal of the outdoor unit
14
(e.g., in
the event of a signal failure or after a battery change). If the indoor unit is not receiving
the signal from the outdoor unit, 3 horizontal lines ("--.-") are displayed next to the
outdoor temperature symbol
10
instead of the measured temperature. In order to
restore the wireless connection, it might be necessary to initiate the transmitter search
manually.
Activating the transmitter search manually
During the transmitter search, place the indoor and outdoor unit
approximately 1.5 m from possible sources of interference (electronic
devices and radio equipment).
1. Press the CH button
5
several times to select channel 1.
The channel display
8
(indoor unit) displays channel 1.
2. Press and hold the CH button
5
for 3 seconds.
The signal symbol
9
flashes while the indoor unit
1
searches for the wireless signal
of the outdoor unit
14
.
24