7
INSTALLATION
Slide the Fixed Return Panel (3) over the extrusion on to the Front Door Assembly (4) at the
leading corner. Ensure this is aligned correctly then drilled and screwed.
Using the sliding rails within the Front Door Assembly adjust them (in or out) to have both the
Fixed Return Panel and Front Door Panel positioned on the boundary line. They should be
positioned evenly between both wall channels and aligned to tray edge.
Drill and fasten off the bottom rail on the inside (Diagram D1). Using a level ensure the front
assembly and return panel are plumb vertically at the corner junction and drill and fasten the top
rail (Diagram D2).
5
6
One hole on inside
bottom rail
Two holes on top
of rail
