Steerix FUSION, Инструкция по эксплуатации, Страница: 7 / 12

1. Push down the throttle stick (left stick) to the lowest position as shown, then switch on the
transmitter.
2. Install 3 “AAA” Alkaline batteries into the receiver box (ensuring correct polarity) and then secure
batteries with included Velcro strap.
6. Take the jib boom cord and thread it through the plastic boom bend eyelet (located on the center spar
directly below the three adjustment holes for the jib boom pivot) then down through the eyelet on the forward
crossbeam. Attach the jib boom cord to the metal clasp suspended by the rubber cord.
7. Take the main boom cord and thread it through the metal deck eyelet on the center cross beam, then through
the metal eyelet on the forward cross beam and attach to the metal clasp as done with the jib boom cord.
8. Adjust the B & C silicone ring on main boom to adjust the main sail radian as shown on photo.
Always switch on the transmitter before switching on the receiver, and always
switch off the receiver before switching off the transmitter.