3
4
UNPACKING THE TURNTABLE
1.
Remove all packing materials and tape from the unit.
Note:
Save all packing materials just in case the unit needs servicing in the future.
2.
Carefully remove the unit from the poly foam and take it out of the plastic bag.
3.
Open the clasps and the lid. Although records can be played with the
speaker lid attached and open, it is recommended this is removed
before playing a record.
4.
Remove the white protective
NEEDLE COVER
by pulling it forward.
Keep it for future use.
POWER AND OTHER CONNECTIONS
1.
Plug one end of the supplied Speaker Connection Cable into the
SPEAKER OUT
Jack
on the record player and the other into the
SPEAKER IN
Jack of the speaker Lid.
2.
Remove the
12V DC POWER ADAPTOR
from the white box (located inside the poly foam
packaging), unwind the cord and insert the small plug into the
12V DC JACK
on the rear
of the record player, then plug the 3-pin plug into a 230V AC Mains power socket.
LINE-OUT CONNECTION
It is possible to play a record on this unit and hear the music through the speakers of an external
audio unit when connected from the LINE OUT jack to the line in jack of the other unit:
1.
Connect an Auxiliary cable (not supplied)
to the
LINE OUT JACK
on the rear of
the record player and the other end of
the cable to the auxiliary input(s) of the
external component, e.g. another Hi-Fi
unit, Amplifier, PC.
2.
Check the volume level of your external
component and adjust it if necessary.
Note:
Refer to the Instruction Manual of the external component for its correct operation.
SUBWOOFER OUTPUT JACK
The Subwoofer Output jack enables you to attach an active subwoofer (not supplied) which
will enhance bass response.
Please contact your retailer for a suitable subwoofer system to use with this unit.
LINE-IN CONNECTION & OPERATION
Any component with an audio output, such as for instance a DAB Radio Module, CD Player,
Cassette Player, MP3 Player can be connected and play its music through the speakers of this
record player. Use a cable with a 3.5mm dia. plug (a 3.5mm to 3.5mm Line-in cord is supplied).
1.
Turn the unit on and adjust the volume.
2.
Plug the supplied Line-in cord into the
LINE-IN JACK
on the rear of the unit.
3.
Insert the plug at the other end of the Line-in cord into the Output Jack or 3.5mm dia.
Headphone Jack of the external Audio Player.
4.
Switch the other Audio Player on, play the music and adjust its volume level if required.
LOCATION OF PARTS
ADAPTOR FOR 45 rpm RECORDS
TONE ARM
ARM REST
FOLDING ARM LOCK
SPINDLE
TURNTABLE
SPEED CONTROL SWITCH
(33
1
/
3
45rpm)
SPEED ADJUSTMENT
KNOB (- / +)
SPEAKER OUT JACK
SUBWOOFER OUTPUT JACK
12V DC JACK
LINE IN JACK
LINE OUT JACK
DC 12V SPEAKER
OUT
SUBWOOFER
OUTPUT
LINE OUT
LINE IN
