PB-5 / PBE-5 / PBC-5
PB-5 / PBE-5 / PBC-
5 Operator’s Manual
17
3.9. Replacing the spindle disk
Loosen the nut and use the 6 mm hex wrench to loosen the set screw (
1
, Fig. 7) by
at least one turn. Then,
rotate
the handles
to the left (
2
) to remove the mandrel (
3
).
Fig. 7.
Removing the mandrel from the machine
Use the 5 mm hex wrench (
1
, Fig. 8) and remove the spindle disk (
2
). Then, install
the new disk (
3
) onto the pin (
4
) and tighten with the same screws.
Fig. 8.
Replacing the spindle disk
1
2
3
4
1
2
3
