SteelMax Li'l Runner Скачать руководство пользователя страница 7

Страница: 7 / 67

SM-WC-

LR Li’l Runner (HS)

Li’l Runner (HS) Operator’s Manual

2. SAFETY PRECAUTIONS

Before use, read this Operator’s Manual and complete a training in occupational

safety and health.

Use only in applications specified in this Operator’s Manual.

3. Make sure that the carriage has all parts and they are genuine and not damaged.

4. Make sure that the specifications of the power source are the same as those spec-

ified on the rating plate.

5. Connect the carriage to a correctly grounded power source.

6. Do not carry the carriage by the cords or arc ignition cable, and do not pull them.

This can cause damage and electric shock.

7. Keep untrained bystanders away from the carriage.

8. Before each use, ensure the correct condition of the carriage, power source,

cords, arc ignition cable, plugs, control panel, and wheels.

9. Before each use, make sure that no part is cracked or loose. Make sure to main-

tain correct conditions that can have an effect on the operation of the carriage.

10. Keep the carriage dry. Do not expose the carriage to rain, snow, or frost.

11. Keep the work area well lit, clean, and free of obstacles.

12. Do not use near flammable materials, or in explosive environments.

13. Make sure that the rubber of the wheels is clean and not damaged.

14. Do not remove the cover of the wheels.

15. Remove objects attracted to the chassis by the magnet.

16. Transport and position the carriage by using the carrying handle and only after

you set the magnet ON/OFF lever to ‘O’.

17. Put the carriage so that four wheels are on the surface. Make sure that no con-

tact is between the surface and chassis.

18. Do not stay below the carriage that is put at heights.

19. Connect the cords and arc ignition cable only after you set the power switch to

‘O’.

20. Keep the sockets clean. Do not use high pressure during cleaning.

21. Install only MIG/MAG torches whose diameter matches the diameter of the torch

holder.

22.

Do not put the torch more than 70 mm (2.76″) outward from the left or right side

of the carriage.

Содержание Li'l Runner




































































Результаты поиска

Содержание Li'l Runner

Отзывы:

Похожие инструкции для Li'l Runner

Бренды по названию

Популярные бренды

SteelMax Li'l Runner, Руководство оператора

Результаты поиска

Содержание Li'l Runner

Отзывы:

Похожие инструкции для Li'l Runner

Бренды по названию

Популярные бренды