SteelMax D4X, Руководство оператора

Страница: 4 / 40

D4X
D4X 3/2014
Operator’s manual for drilling machine
- 4 -
120V. When used on building sites, it must be supplied through a separation
transformer made in the second class of protection.
3) Machine can be used outdoors, but is not weatherproof. Do not expose to rain, snow or
frost.
4) Machine should not be used on: rusty surfaces, steel plates with thick covering of paint,
uneven surfaces or next to a welding machine.
When the machine is attached to
any metal surface, that surface should not be welded. Remove the drill from the
steel before beginning welding. This can cause damage to the machine and
will void the warranty
.
5) In all cases always use a safety chain/strap (see drawing 1). The safety chain should
not be loose! To avoid this situation the safety chain should be wrapped around the
element it is drilling. Loss of electric power will cause a loss of electromagnetic
adherence to the metal and will cause the drill to fall which could cause serious injury or
death.
6) Do not use the machine in explosion hazard zones.
7) Do not start work if the machine has excessive play on guide slides.
8) Always wear safety goggles and ear protection.
9) Do not remove metal chips with bare hands.
Safety chain can also secure the drill through
the handle .
10) Do not touch the spindle and cutter during work.
11) Tools must be fastened firmly. When a milling cutter is used, check before the start of
work to assure that tool retaining screws are screwed tight.
Drawing 1.
Examples how safety chain should be fastened.
.