ABM-28
ABM-
28 Operator’s Manual
3
1. GENERAL INFORMATION
1.1. Application
The
ABM-28
is
a
beveling
machine
designed
to
mill
edges
of
plates
with
the
thickness
of up to 35
mm (1.38’’). The beveling angle can be set in the entire range from 60°
to
–60°,
including facing at 0°.
The
feed is performed automatically after starting the
machine.
Accessories allow beveling of
36
–70 mm
(1.38
–2.76’’)
thick plates
at
the
angle
set
in the entire range from
0°
to
60°
(including facing) or from 0° to
–60°. It is also
possible to establish J-bevels in 20
–70 mm (0.79–2.76’’) thick plates and to remove
clad of up to 5
mm (0.2’’) depth from plates with a thickness of up to 127 mm (5’’).
1.2. Technical data
12
11
m
m
(47
.7’
’
)
619 mm (24.4’’)
532 mm (20.9’’)
