7
1 GAL. FOAM MARKER ASSEMBLY INSTRUCTIONS
STEP FOUR:
Attach the foam marker bracket to
the end of the boom and fasten the foam marker
to the bracket with hose clams. HFSSC
-
1475 (2) &
IFI
-
10.25
-
20 (2)
STEP FIVE:
Cut the provided hose to length as
needed with the “tee” fitting positioned to the
right as shown, route the hoses across the boom
and connect to the “tee” fitting and foam markers
as shown.
NOTE:
Repeat step three for the other side of the
boom.
NOTE:
Before cutting hoses, be sure to allow
enough length to extend and fold the boom on
both sides.