STEELFORCE PRO 100 HC
5
2 Safety Information
2.1 Symbols/warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
2.2 Symbols used on the workstation frame
2.3 Organizational measures
The workstation frame can best be assembled by two people. Turning the frame,
once the work surface has been fitted, is a task in particular which requires two
people!
2.4 Informal safety measures
Keep the assembly/operating manual in the place where the workstation frame is
used at all times.
Make sure that all safety information on the table (see Section 2.2, Symbols used
on the workstation frame) is legible, replacing the same if necessary.
2.5 Note for those assembling the workstation
The workstation must be assembled/worked on by persons over the age of 16.
The persons referred to above must have read and understood the assembly/
operating manual.
2.6 Transport and assembly
The workstation frame must be moved by two persons only, and in such cases must
be retracted.
Do not drag or pull the workstation frame over the floor.
Assemble the workstation frame with the supplied tools only. They are the only tools
which ensure that the screws can be tightened to the correct torque.
2.7 Use of the workstation frame
Children may only use the desk under supervision. They may not be aware of the
dangers of the agency. This puts them at serious risk of self-injury, possibly with
fatal consequences.
The desk may only be used in an environment that is suitable for it.
Do not use the desk on an uneven surface. The desk will then not be stable.
This symbol indicates an immediate threatening situation for any person’s
life or health. Failure to adhere to such information may have serious con-
sequences for health, or could even result in life-threatening injury or
death.
This symbol indicates important information. Failure to adhere to such in-
formation could lead to damage to the workstation.
Do not place objects or parts of the body under the workstation frame or
between the cross members. This could cause serious injury
.
Do not exceed the maximum permitted load on the workstation frame.
Overloading could lead to breakage and serious injury as a consequence.
