STEELE PRODUCTS SP-GG200D, Руководство пользователя

Страница: 19 / 50

19
Owner s Manual
Operation (cont’d)
Powering 120 Volt AC Tools And Equipment:
1. Prior to powering tools and equipment, make sure the generator’s rated voltage, and amperage
capacity (120V/AC @ 13 AMPs) is adequate to supply all electrical loads that the unit will
power. If powering exceeds the generator’s capacity, it may be necessary to group one or more
of the tools and/or equipment for connection to a separate generator.
2. Once the generator is running, simply connect the power cords of 120 volt AC powered
tools and equipment into the 120 volt AC outlets.
NOTE: THE GENERATOR FEATURES AN OVERLOAD PROTECTION DEVICE
WHICH WILL SHUT DOWN GENERATOR IF IT OVERLOADS. IF THIS OCCURS
MAKE SURE TO DISCONNECT ALL ELECTRICAL POWER CORDS CONNECTED
TO THE GENERATOR BEFORE YOU START GENERATOR.
3. Disconnect all electrical powered tools and equipment from the generator’s 110/120 volt AC
duel outlets.
4. After the engine and generator have completely cooled, store generator in a safe, clean, dry
location (if not already installed).