Steelcraft SAVVI Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 32

Steelcraft SAVVI Скачать руководство пользователя страница 27

BABY CAPSULES

27

• THE MAXIMUM WEIGHT OF THE CHILD USING THE BRITAX SAFE N

SOUND UNITY NEOS BABY CAPSULE OR BRITAX SAFE N SOUND

UNITY BABY CAPSULE ISOFIX COMPATIBLE IS NOT TO EXCEED 12kg.

• THE BRITAX SAFE N SOUND UNITY NEOS BABY CAPSULE OR BRITAX

SAFE N SOUND UNITY BABY CAPSULE ISOFIX COMPATIBLE ARE THE

ONLY COMPATIBLE BABY CAPSULES DESIGNED TO FIT THE SAVVI

STROLLER TO BE USED WITH CLICK N GO RECEIVERS (Supplied).

• REMOVE THE STROLLER SEAT OR BASSINET FROM THE STROLLER

FRAME BEFORE INSTALLING THE BABY CAPSULE.

• THE BABY CAPSULE MUST BE CORRECTLY INSTALLED AND LOCKED

ONTO THE STROLLER.

• THE BABY CAPSULE CAN ONLY BE ATTACHED IN THE UPPER POSITION

ON THE STROLLER FRAME AND MUST ALWAYS BE IN THE REARWARD-

FACING POSITION (FACING TOWARDS THE HANDLE).

• SECURE THE CHILD USING THE BABY CAPSULE HARNESS AT ALL

TIMES.

• DO NOT LEAVE CHILD IN THE BABY CAPSULE FOR EXTENDED PERIODS.

• THE BABY CAPSULE IS DESIGNED TO PROVIDE MOBILITY OUTSIDE OF

THE CAR BUT IT SHOULD NOT BE USED INSTEAD OF AN APPROPRIATE

COT.

• THE BABY CAPSULE MUST BE REMOVED FROM THE FRAME BEFORE

FOLDING.

• THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD EXPOSED TO

THE SUN. THE CANOPY OR HOOD ON THIS PRODUCT WILL NOT GIVE

YOUR CHILD TOTAL PROTECTION FROM THE HARMFUL RAYS OF THE

SUN.

WARNINGS:

IMPORTANT NOTES:

«
...
25
26
27
28
29
...
»

Содержание SAVVI

































Отзывы:

Нет отзывов