Steelcraft BABY CAPSULE, Руководство пользователя

Страница: 40 / 64

40
HOW TO INSTALL IN AN AIRCRAFT
HOW TO INSTALL USING AIRCRAFT LAP BELT
The Baby Capsule without base is suitable for use on aircraft in rear
facing mode.
The Baby Capsule must be used in accordance with the aircraft
operators procedures, and any directions from the aircraft operator,
pilot or crew.
The Baby Capsule may not fit in smaller aircraft.
Inform the aircraft operator that a child restraint is intended to be used
on the aircraft when booking the flight as the child restraint may not
be suitable for use in that operator’s specific aircraft.
Follow the instructions of the flight crew or pilot.
For use of the child restraint in cars in countries other than Australia
and New Zealand, The user should consult the country’s local
authorities, car hire companies, car insurance companies, etc. for
advice. The child restraint may not be acceptable for use in all cars.
AIRCRAFT REARWARD-
FACING BELT PATH
marked in green.
FIT THE BABY CAPSULE TO THE AIRCRAFT SEAT
You do not need the base or top tether strap on an aircraft. We
recommend that you check it in with your luggage.
A. Position the Baby Capsule rearward facing, align it centrally within
the allocated seating position. If possible, lift the armrests out of
the way to improve access to installing the aircraft lap belt and to
suit the width of the capsule.
B. Place handle in “non-rocking”
position, that is, fully backwards.
Carefully remove cover on the
side to reveal
AIRCRAFT
REARWARD-FACING BELT
PATH
label marked in green.
NOTE:
Never use this path in a car.
Always replace cover after use.