Page 1 of 2
939500113 Rev B
TS321
Burton Leather Executive Chair
R
©
2006 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
TS32101
High Back
TS32102
Mid Back
TS32103
Mid Back
Sled Base
(Steps 1-2 on Page 1)
(Steps 3-6 on Page 2)
1
1.
Attach sled base to seat
Lay the chair seat on the floor. Taking care to ensure
that the seat will not be scratched, cut or stained.
Locate the sled base with the four (4) spacers on the
bottom of the chair seat and attach using four (4)
1/4-20 x 2-3/8" (60mm) long button head, hex drive,
sems washer type screws.
2.
Attach back assembly to seat assembly
Place the front of the chair seat assembly on the floor.
Taking care to ensure that the seat will not be scratched,
cut or stained. Place the back assembly onto the bottom
of the seat assembly as shown (2a). Attach using four (4)
M8 x 1-1/16" (27mm) long hex head bolts (2b).
2b
2a
