LEVELERS
Assembly Directions
REV A
Y9501911
Page
9 of 11
Steelcase
ANGLE
BRACKETS
17.
Screw Return’s levelers all the way in. Slide Return into position against Corner Unit,
allowing room for Return’s end panel to clear minifix screws in Partition Wall (A). Now
push Return end panel against Partiton Wall to engage minifix cams and screws (B).
Tighten minifix cams. Install screws to secure Partition Wall and Support Leg angle
brackets.
ASSEMBLY AND INSTALLATION
OF RETURN
FLUSH
FLUSH
16.
Attach Return End Panel to Worksurface with 3/4” screws.
All outside edges should be flush. Now attach Support Leg
as shown in Fig. B.
Fig. B
(top view)
SUPPORT PANEL
WITH ANGLE BRACKETS
WORKSURFACE
Fig. B
FLUSH
CORNER
UNIT
RETURN
END PANEL
MINIFIX CAMS ON INSIDE
OF RETURN END PANEL
PARTITION WALL
A
B
SUPPORT LEG
