Steelcase Spine, Руководство по эксплуатации

Страница: 14 / 43

14 116 1074 001 / 01 – 02/2018
• Make sure routed cables cannot cause stumbling.
Maintenance
Replacing components
Work on electrical components (e.g. lights, sockets) may
only be carried out by qualified personnel.
Cleaning the module
WARNING
Moisture increases the risk of electric shock.
— Do not touch electrical components (lights, plugs, etc.)
with a wet cloth or liquids.
— Switch off the power supply before cleaning.
• Wipe off upholstery fabrics with commercial cleaning agent.
• Use a damp cloth to wipe off surfaces.
• Wipe lights and monitors (optional) with a dry and antistatic
cloth. If necessary, use commercial screen cleaner.
Moving the module
The Spine module may only be moved disassembled with
tables de-mounted. The tables may only be demounted by
qualified personnel.
Functional checks
A functional test shall be carried out by the installer after assem-
bly. This shall be recorded.
• Keep the signed protocol of the functional test with the in-
structions.
• Before each height adjustment, observe the table "Functional
checks" in the operating instructions of the table.
• In addition, regularly perform the following functional checks
of the Spine module:
Inspection point Function check Measure
Cable • Check insulation
for defects.
• Replace if
defective.
Cable • Check distance to
heat sources (e.g.
radiators).
• Establish
distance.
Light • Check for firm
seat.
• Press into the
holder.
Light • Check function. • Replace if
defective.
Power closet • Check the door for
correct closure.
• Close the door.
Inspection point Function check Measure
Lockable sto-
rage compart-
ment • Check the door for
correct closure.
• If necessary,
have the lock
replaced.
Lockable sto-
rage compart-
ment • Check for firm
seat.
• If necessary,
have it repaired.
Active Layer • Check for firm
seat.
• If necessary,
have it replaced.
Storage
If the Spine module is to be temporarily stored, the following
storage conditions must be met:
• Undamaged transport packaging
• Sufficient carrying capacity of the floor.
• Dry floor.
• Horizontal storage surface.
• Temperature range +5 °C to +40 °C.
Disposal
The Spine module may only be disassembled by qualified
personnel.
• Adhere to the manufacturer's instructions when disassem-
bling. Steelcase AG makes the instructions for disassembly
available on the Internet at the following address:
www.steelcase.com/eu-en/ShareIt-Collection-guide
• Separate the disassembled parts of the module by material
groups and dispose of according to local laws and regula-
tions.