background image

Page 1 of 4

939504576 Rev H

Slatwall Skin

®

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, 
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com

©

 

2003 Steelcase Inc. 

Grand Rapids, MI 49501 
U.S.A.  
Printed in U.S.A.

100 lb. maximum load limit 
applies to all Slatwall Skins

P2

Содержание Slatwall Skin

Страница 1: ...888 STEELCASE 888 783 3522 for immediate action by people who want to help you Outside the U S A Canada Mexico Puerto Rico and the U S Virgin Islands call 1 616 247 2500 Or visit our website www steelcase com 2003 Steelcase Inc Grand Rapids MI 49501 U S A Printed in U S A 100 lb maximum load limit applies to all Slatwall Skins P2 ...

Страница 2: ...self drilling screw to provide a second attachment point for the bracket See illustration 2 3 Attach dual lock pads to brackets with 3 16 long screws See illustration 2 4 Position the Slatwall Skin with the hinge open 90o so that the holes align Rivet into place using the holes in the frame Lower series of holes on the hinge used only when installing slatwall on the uppermost rail of a 2 Segment S...

Страница 3: ...e 4 2 AVOID USING FORCE to engage bracket Refer to Steps 9 and 10 7 Once the bracket is engaged into the frame slide the middle attachment bracket towards the outside edge of the skin while forcing the skin flat against the frame rail until the bracket slot and the skin slot are within approximately 1 16 as shown This is the locked position See illustration 4 8 Check to make sure that the bracket ...

Страница 4: ...frame for utilities use a skin removal tool at the bottom of the skin On C skin unlock the middle attachment NOTE If a Datum cover is attached directly below the slatwall it should be removed before attempting to disengage slatwall 13 Disassembly a refer to step 6 7 and 12 b drill out rivets that are attached to the frame Illustration 6 step 11 push step 11 push 2 4 Packaging 1 4 1 4 5 8 1 2 2 pla...

Отзывы: