®
Page 2 of 3
939505525 Rev C
SHIPPED COMPONENTS:
-1 table top
-2 leg assemblies
HARDWARE:
- 16 screws
TOOLS REQUIRED:
- R3 square head driver
WARNING:
Protect top surface from
scratches while attaching legs.
Install Leg Assemblies
TIP: Place a shim under rug
to allow a finger hold when
assembled unit is ready to upright.
Install Legs To Table Top
1.
Carefully place table top upside down
onto rug or other soft, clean surface.
2.
Position each leg assembly by
orienting long side of base plate toward
outer edge of table and locating
(4) pilot holes. Install screws.
3.
Secure leg assemblies by installing
remainder of screws.
2
2
2
1
Install screws in
remaining holes.
3
T-BASE
L-BASE
Orient the longer
side of base plate
toward outer edge
of table.
Locate and install
leg assembly with
(4) pilot holes.
