Page 4 of 4
Y9501898
Steelcase
Carefully set binder bin ontoshelf assembly.
Align both sides and back panelwith shelf assembly.
5.
6.
7.
Route cords if any, thensnap on trim covers.
USE CORK SQUARES TO LEVELBINDER BIN IF NEEDED.
TOP VIEW
Страница 1: ... Panel TOOLS Steelcase Inc Grand Rapids MI 49501 U S A 1 888 783 3522 Y9501898 REV C Assembly Directions Printed in U S A 42 1067 mm Unit 64 1626 mm Unit Binder Bin must be used on a panel that has a return panel or a T panel configuration ...
Страница 2: ...on panel Install panel brackets by inserting hooks into slots then slide as shown Make certain safety catches on top and bottom of brackets are engaged FIXED END OF BRACKETS ON TOP ADJUSTABLE END OF BRACKETS ON BOTTOM DIM A SIZE DIM A 42 40 3 4 1035 mm 64 62 3 4 1594 mm ...
Страница 3: ...NE SET OF HOOKS MUST EXTEND TO THE OF EACH PANEL BRACKET INSIDE 3 4 Install support brackets onto panel brackets as shown Make certain they are securely seated Lower shelf assembly onto support brackets and secure with 4 screws provided FRONT VIEW ALIGN BRACKETS WITH SHELF RAILS ...
Страница 4: ...1898 Steelcase Carefully set binder bin onto shelf assembly Align both sides and back panel with shelf assembly 5 6 7 Route cords if any then snap on trim covers USE CORK SQUARES TO LEVEL BINDER BIN IF NEEDED TOP VIEW ...
