Page 5 of 5
939500089 Rev B
3.
Position modesty panel slightly above
end panels, then lower so that kd studs
are engaged into kd clips.
4.
Install top onto assembly so that it overhangs
equally on each end and is flush in the back.
Refer to page 3 for more details.
5.
Check to see that unit is level. If not, remove
drawers and adjust leveling glides as neccessary.
®
KD CLIP
MODESTY PANEL
END PANEL
3b
3c
3d
5
3a
3a
4
4
