®
PRODUCT COMPLIANCE STATEMENTS
FCC COMPLIANCE STATEMENT -
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC WARNING -
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The Federal Communications Commission warns that changes or modifications of the unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.
IMPORTANT SAFETY INSTRUCTIONS -
When using an electrical furnishing, basic precautions
should always be followed, including the following: Read all instructions before using the Kiosk stand.
Maximum operating temperature is 40
o
C.
DANGER -
To reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning.
WARNING -
To reduce the risk of burns, fire, electric shock, or injury to persons:
1) Unplug from outlet before putting on or taking off parts.
2) Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
3) Never operate this furnishing if it has a damaged cord or plug, Return the furnishing to a
service center for examination and repair.
4) Keep the cord away from heated surfaces.
5) Never operate the furnishing with the air openings blocked. Keep the air openings free of
lint, hair, and the like.
6) Never drop or insert any object into any opening.
7) Do not use outdoors.
8) Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
9) Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
10) To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain, dripping or splashing
moisture and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 2 of 16
23466201 Rev E
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
Figure 67.1
Grounding method
GROUNDING
PIN
SAVE THESE INSTRUCTIONS
This appliance is intended for commercial and institutional use only.
Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
OPERATING INSTRUCTIONS -
Please refer to the attached Installation Instructions.
USER-MAINTENANCE INSTRUCTIONS
The receptacle power block is equipped with a circuit breaker that will shut off power in an
overload condition. Press to reset the circuit breaker to restore power.
The receptacle Kiosk power cord plugs must be located near the Kiosk and be accessible to the
operator. For compliance with clause 5.4.2 of IEC 60065.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. When the main (power supply) plug or an
appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
DANGER -
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product
- if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug that looks
like the plug illustrated in sketch A in Figure 67.1. Make sure that the product is connected to
an outlet having the same configuration as the plug.
No adapter should be used with this
product.
