®
Page 4 of 5
Doc # 157344 Rev B
7.
Align the tab on the new back
assembly with the slot in the back
frame. Clip together (7a) and slide
into position (7b) on each side.
Install one side at a time.
8.
Use T-20 torx bit to install the
two (2) screws on top of the back.
Do not overtighten.
9.
Tuck bottom of new back assembly
under the under-seat plate with bottom
of back assembly located around mating
screw bosses (9a). Use drill and T-30
torx bit to install two (2) screws (9b).
Do not overtighten.
9b
8
8
7b
7a
9a
