Maintenance
_______________________________________________________________
12
156562
6
Maintenance
6.1
Safety-relevant
information
Only appropriately qualified and
authorised personnel may carry out
maintenance and repair work.
Only use suitable tools for these
operations!
6.2
Functional check
The
FlipTop Twin
conference table/training room
table has to be checked for correct functionality at
regular intervals.
Inte
rval
Inspection
point
Functional
check
Required
condition
Measure
(if
required)
Regu-
larly
FlipTop Twin
fastening
elements
Position and
attachment
All fastening
elements
are fixed at
the correct
position; all
screws are
tight
Correctly
attach
fastening
elements;
tighten
screws
-||-
At the
underside of
the tabletop,
at the locking
and unlocking
mechanism
Check
position and
fixation of
tabletop
Tabletop
has to be
locked in
place in end
position
Correctly
position
tabletop
and
properly
lock it
Table 6-1: Functional check
6.3
Maintenance
Only authorised and qualified personnel may carry
out maintenance work. Please contact our
Customer Service Department in this regard (see
Repairs and spare parts on page 14
).
Risk of injury or damage!
The fastening screws could tear out when
lifting the conference table at the tabletop
or at the attached components.
Always take hold of the conference
table / training room table at the
underframe to transport or move it.
ATTENTION
The use of non-approved spare parts
can cause damage to the conference
table / training room table.
Only
components
provided
by
Steelcase may be used as spare parts.
Coordinate the installation of differing
parts with Steelcase
.
Co
mply with the stated
maintenance and inspection
intervals.
6.3.1
Exclusion of liability
Steelcase assumes no liability or warranty in the
following cases (see
Liability on page 2
):
■
Inadequate monitoring of the product
components (functional checks)
■
Improper maintenance
■
Maintenance performed by third parties
■
Maintenance performed by unqualified and
unauthorised personnel
■
Use of components and adaptations that do not
originate from Steelcase
■
Unauthorised changes to the product with
regard to its design and configuration
■
Intentional misuse
■
Improper use (see
Intended use on page 3
)
6.3.2
Cleaning and care
ATTENTION
Aggressive cleaning agents may cause
product damage or discolouration.
Only use polishing and cleaning
agents that
are suitable for the
respective materials (wood, plastics,
metals, etc.).
Commercially available household cleaning
agents can be used to clean the surfaces of the
conference table / training room table.
