Page 3 of 3
939500228 Rev F
6.
Move cabinet into position.
7.
Secure worksurface to adjustable-height
brackets with (4) screws through each bracket.
8.
Reinstall finished top onto cabinet.
9.
Reinstall drawers into cabinet.
a) Push drawer rails back into pedestal.
b) Pull bearing cages into forward position.
c) Check to see if lock is functioning properly.
If not follow illustration to adjust.
10.
Adjust leveling glides as needed.
Front and side edges
of worksurface must align
with drawer fronts.
6
NOTE: Push brackets tight against end panels
when installing screws into worksurface.
7
9b
9a
Use a 5/32" Allen Wrench
to adjustlocking mechanism.
Rotate camclockwise for
upward movement, counter-
clockwise to move down.
9c
