®
Page 2 of 4
Doc # 158170 Rev A
Leveling a Cabinet
without Drawers
1.
Adjust leveling glides.
with Drawers
Unlock (1a) and remove
bottom drawer (1b).
2.
To remove drawers
push lever
down
on one
side, and
up
on the other.
1a
1b
OR
2
1
Страница 1: ...ds MI 49501 U S A Printed in U S A Page 1 of 4 Doc 158170 Rev A WARNING TIP OVER HAZARD DO NOT pull down on doors 12 wide towers must be attached to a wall under worksurface storage or an end panel move unit while loaded move unit by lifting from its top DO NOT You MUST WARNING TIP OVER HAZARD Install this unit against a wall or gang to a similar unit FOLLOW THESE INSTRUCTIONS TO PREVENT UNIT FROM...
Страница 2: ...veling a Cabinet without Drawers 1 Adjust leveling glides Leveling a Cabinet with Drawers 1 Unlock 1a and remove bottom drawer 1b 2 Adjust leveling glides To remove drawers push lever down on one side and up on the other 1a 1b OR 2 1 ...
Страница 3: ...N OUT SIDE TO SIDE DOOR HINGE Hinge Adjustment Adjust doors A 2 screwdriver is recommended for adjusting hinge Adjustable Shelf Installation 1 Install 4 shelf pins per shelf in desired location as shown 2 Lower each shelf into place 2 2 1 1 ...
Страница 4: ...158170 Rev A Install both counterweights on top of each other behind the drawers using four 4 10 x 2 flat head screws through the holes provided For style CRTW Single Door above Drawers Two 2 counterweights are required ...