1.
2.
3.
4.
Align holes in bracket with holes in
plate. The wider end of the bracket
mounts to the worksurface through
the base plate holes, the narrow
end mounts to the base leg.
Secure the plate to the worksurface.
Secure the narrow end of the
bracket to leg.
Attach the base bracket to the
worksurface through the holes
in the plate.
REINFORCEMENT BASE BRACKET ATTACHMENT
Conference Table with
RECTANGULAR BASES
Conference Table with
U-BASES
Follow these steps to attach reinforcement brackets to Rectangular and
U-Bases on your Convene conference table.
It’s important that you
install four brackets per base, one bracket on front and back of each leg.
3
1
4
2
#10 x 1.075”
screws, (3)
per bracket
#8 x 5/8” screws,
(3) per bracket
#10 x 7/8” screws
Install a reinforcement bracket
on front and back of each leg.
U-Base is shown,
also applies to
Rectangular Base.
Page 6 of 11
N9501959 REV. F
Steelcase
