Assembly Directions
93-9501164 REV B
Page
5 of 6
4.
Remove the retainer rings from pivot bushings
by using the flat-bladed screwdriver and slide
out pivot bushings and discard.
5.
Turn housing and gear assembly clock-wise
while at he same time lifting up thus removing
it from the chair. Old removed parts are not
to be used.
6.
Remove retainer ring from the end of u-joint
pin by using a flat-bladed screwdriver. Slide
pin out and remove u-joint assembly.
RETAINER RINGS
PIVOT
BUSHING
PIVOT
BUSHING
HOUSING AND
GEAR ASSEMBLY
HOUSING AND
GEAR ASSEMBLY
RETAINER
RING
U-JOINT
ASSEMBLY
U-JOINT
PIN
