4
of
4
939500722 Rev A
For 50”, 53”, 61”, and 65” high power
and standard panels
6.
Insert the top attachment bracket into the taller
panels. Make sure the holes in the bracket are
aligned with the holes in the shorter panel. Position
the filler plate and secure with the (2) existing bolts.
For power and standard panels
7.
When replacing top cap, press top cap reveal
sides inward at one end and slide top cap down
over reveal sides along entire length.
NOTE: Top cap must line up with panel uprights.
7.
6.
ATTACHMENT
BRACKET
IDENTIFICATION
NUMBER
BRACKET
ACTUAL
PANEL HEIGHT
NOMINAL
PANEL HEIGHT
HEIGHT OF PANELS
TO BE JOINED TO
PAB-3-41
PAB-3-53
PAB-3-61
PAB-3-65
41-1/4”
52-3/8”
61-1/32”
64-11/16”
41”
53”
61”
65”
any larger
any larger
any larger
80” only
NOTE: Be sure to measure the height of the short panel.
Check the brackets in the package to be sure the identifica-
tion number is the same as the short panel height.
SHORTER PANEL
ATTACHMENT
BRACKET
BOLTS
FILLER PLATE
TALLER PANELS
PANEL UPRIGHT
TOP CAP REVEAL
TOP CAP
