Page 4 of 4
939504211 Rev D
Cylinder Replacement
1.
Remove retainer ring and pin.
2.
Turn cylinder and remove.
3.
Turn replacement cylinder in until contact points just
meet.
4.
Lightly grease pin and replace pin and retainer.
5.
If the cable does not fully unlock the cylinder, allowing
keyboard to move freely, repeat step 1. Then turn the
cylinder in 1/2 turn. If actuator is not completely closed
when cable is fully activated, repeat Step 1. Then
turn the cylinder out 1/2 turn.
Evaluate and repeat this step if necessary.
6.
Finger tighten cylinder nut.
1
2
6
6
Keyboard Unlocked Position
Keyboard Locked Position
3
4
Contact
Points
Completely
Closed
.625 .125
+
_
