Assembly Directions
93-9501407 REV A
Page
2 of 3
Lay worksurface inverted onto a soft material. Locate (2) sets or (3) mounting holes.
1.
EDGES OF PLYWOOD AND MOUNTING BRACKET MUST BE PARALLEL
Position and loosely secure recessed shelf onto worksurface with (6) screws. Make sure the edge of mounting
bracket is parallel with edge of plywood. Obround holes in mounting brackets allows adjustment of shelf, side to
side. After shelf is centered in worksurface opening, tighten (3) screws as shown.
2.
TIGHTEN THIS SET OF (3) SCREWS
