Assembly Directions
93-9501353 REV A
Page
7 of 7
Remove center modesty panel from stored position in center wire tray, and insert between right and left hand
modesty panel in the manner shown below. Secure center modesty panel to right and left hand modesty
panels with (2) sheet metal screws. Align (2) holes in center modesty panel flange with (2) pre-drilled holes in
underside of worksurface and secure with (2) wood screws.
NOTE: Make sure all screws are tight, carefully turn unit upright and adjust glides.
7.
10 X 7/8”
WOOD
SCREW
10 X 3/8” SHEET METAL
SCREW
