Steel City 50125, Руководство пользователя

Страница: 16 / 34

ASSEMBLY
CABINET ASSEMBLY
1. Fasten the 2 Long L Channel (A) and 2 Short
L Channel (B) with 4 Corner cabinet post (C) using
Eight M6x12mm Hex Head Flange Screw (D).
2. Attach the leveling feet (E) by screwing the studs
into the threaded holes in the bottom of the base.
SEE FIG.1
1
6
Fig.1
D
B
C
A
E
3. Fasten the Top Plate (F) and Corner Cabinet
posts
using eight M6x12mm Hex Head Flange
Screw and eight
M6 Hex Head Flange Nut (G).
SEE FIG.2
Fig.2
F
G
4. Fixed the motor on the top plate using Motor ixed
rod (H) and 12 ring (I)and cotter pin(J). Using
M5X12mm Pan head screw(K) and cable clamp to fix
the motor power cord(L).
f
Φ
SEE FIG. 3
Fig.3
H
J
I
K
L
4. Fasten two wide cabinet plate and two thin cabinet
plate using 24 M6X12mm Hex head flange screw (M).
SEE FIG. 4
M
Fig.4
Take care to support the motor when turning the base
right side up. Failure to do so can cause the motor to
slam into the side of the cabinet damaging the motor,
cabinet or both.