17
Pot detection
∙ Place the cookware on the cooking zone and activate the cooking zone.
∙ The device proves whether the cookware is suitable for induction or not.
∙ The symbol „
“ flashes in the display if no suitable pot is used.
Use
Only touch the switching point
on the control panel with your fingers.
1 - Power 1 - 9 - P
2 - Timer setting
3 - Timer
4 - Keeping warm
5 - Power level slider
6 - Child lock
7 - On/Off
8 - Pause / Recall
Getting started
∙ Activate the control with the ON/OFF button
, the display shows “0”.
∙ The electronics remain activated for approx. 10 seconds.
∙ If no programming is taken, the device shuts off again.
Programming of the cooking zone
∙ If the control is activated, you can use the slider to set the power level 1 – 9
and the booster “P”. The power level is indicated in the display.
Booster
∙ All cooking zones have a booster function for a rapid heating of the food.
∙ To set the booster, slide the slider of the selected cooking zone to “max”, “P” is
displayed.
∙ The booster function is available for 10 minutes for each cooking zone, after this
time the device turns back to power level 9.
∙
If both cooking zones are set to the booster function “P”, the first set zone will be
reduced. Then, the left zone switches to level 6 and the right zone to level 9.
∙
if water, fat or a pot is placed on the control panel, error code E03 appears. In
this case, replace the pot and clean the panel.
