Steba E 160, Инструкция по эксплуатации

Страница: 17 / 60

17
Failure list
Possible problem Easiest solution for the problem
The appliance is not working when
switched on The locking bow is not placed in the cor-
rect position. Check the position of it.
Press safety switch on the bottom.
The motor jams during juicing Remove large fruit stones. Always put the
fruit into the appliance when it is wor-
king. Never push too hard with the pusher
on the food.
Pulp is collecting in the sieve or at the
lid Stop working. Open the lid and remove
the pulp with a small spoon. Then assemb-
le the lid on the base again.
The pulp is too wet and not so much
juice Work slower. Remove the sieve and clean
it with a soft brush. Remove all fibers
which are accumulated there and clean
the openings of the sieve.
The appliance is very loud or vibrates Switch off the appliance and check if the
sieve is placed at the correct position.
Pulp is not collected at the pulp con-
tainer Switch off the appliance and place the
pulp container at the correct position
Hints:
Rinse all fruits or vegetables. It is not necessary to cut most of fruits or vegetables,
when they fit into the feeding opening.
The skins of fruits with a hard or a skin which is not suitable for eating,like kiwi or
melon, should be removed before juicing.
At Pineappels the hard base should be removed, it is not necessary to peel it.
Citrus fruits should be peeled before juicing.
Add a small amount of lemon juice to apple juice. This avoids that the color of the
juice changes.
The stone of fruits must be removed.
Do not juice banana or avocado, as this will jam the appliance.
The pulp contains fibers and cellulose and contains plenty of nutritious ingredients.
The pulp of vegetables can be used e.g. to thicken a soup. The pulp must be used on
the same day!