8 | ENGLISH
AUTO SHUT-OFF
The Auto Shut-Off feature of the Digital Fabric Steam Press includes both an Auto Shut-Off
and an Auto Wake-Up. These multiple function safety features deactivate electrical power
to the heater when the Pressing Plate has been left in closed position against the Ironing
Board for more than 10 seconds. Heater deactivation is signaled by a beeping sound. Heater
functionality is restored when the Pressing Plate is lifted back up.
Power to the heater will also be cut if the Pressing Plate is left in the lifted position without use
for approximately 15 minutes (signaled by a continuous beeping sound). The heating ability of
the unit can be restored either by resetting the On/Off Switch,or by pressing the Temperature
Control Buttons.
IMPORTANT: Auto Shut-Off does not mean that power to the unit is totally cut off.
Power is always on, and the Power Indicator Light will remain illuminated until On/Off
Switch is set to “Off” position (FIGURE 1, page 6).
CLEANING THE DIGITAL FABRIC STEAM PRESS
1.
Fill Water Reservoir with water using procedure on page 6 of this manual.
2.
Place Pressing Cushion in the middle of Ironing Board.
3.
Place a clean towel over Pressing Cushion and Ironing Board.
4.
Set Temperature Control Buttons to the highest setting (LINEN).
5.
When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto
Pressing Cushion.
6.
Press Steam Burst Button six times.
7.
Allow Pressing Plate to cool.
8.
Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may damage
Pressing Plate.
9.
Ironing Board fabric cover is removable for cleaning. Hand wash only with mild detergent.
PROPER STORAGE
1.
Once pressing is complete, immediately turn unit off and unplug power cord from
electrical outlet.
2.
Allow unit to cool completely (at least 30 minutes).
3.
Lower Pressing Plate down, and turn Locking Knob to “Lock” position.
4.
Wrap up power cord and place in Cord Storage Compartment.
5.
Store all accessories safely away, preferably near Digital Fabric Steam Press.
6.
Store Digital Fabric Steam Press in a cool, dry place.
Storage & Care