·
The
Pole
(1) connects the
Pole Top
(not shown) to the
main unit at the
Pole Base
(2). The
Pole Top
is comprised of the
Clothes Hanger Hook
and the
Steam Nozzle Holder
. The
Clothes
Hanger Hook
allows you to steam garments that are hanging
from a clean, rust-free hanger, while the
Steam Nozzle Holder
provides a safe and convenient place to hang the
Steam Nozzle
.
·
The
Water Tank
(3) is the reservoir where water is placed for use
by the steamer. Water is placed in the
Water Tank
by removing
the
Water Tank Cap
(4), exposing the inlet into which water
can be poured.
·
The
Carrying Strap
(5) can be used to safely lift the unit off of the
ground and carry it up flights of steps or other obstacles over
which the unit cannot be rolled.
·
The
Lighted On/Off Switch
(6) provides a visual indication of
whether or not the steamer is in use.
·
The
Drain Plug
(7) can be removed for easy drainage of the
Water
Tank
.
·
The
Power Cord
(8) plugs into a standard three-prong electrical
outlet.
·
The
Rolling Casters
(9) allow for quick and effortless movement
of the steamer over flat, stable surfaces.
·
The
Hose Base and Electrical Plug Receptacle
(10) is the point to
which the Hose attaches to the main unit. The
Hose
(11) is the
delivery system for the steam to be transmitted from the
Water
Tank
to the
Steam Nozzle
.
·
The
Handle
(12) is permanently attached to the
Steam Nozzle
, and
provides a safe point to grip and direct the flow of steam.
·
The
Steam Trigger
(13) must be depressed in order for
steam to be emitted from the
Steam Nozzle
.
·
The
Steam Nozzle
(14) is the aperture from which steam flows
and is spread over a wide area.
·
The
Water Filter
works to purify the water in the
Water Tank
,
ensuring that the steam you use is as clean and pure as possible.
The
Water Filter
is replaceable (see page 3 of this manual for
information on ordering replacement filters).
7
SF-465 Q
UICK
S
TEAM
TM
P
ROFESSIONAL
P
RODUCT
I
NFORMATION
