Steamfast MODEL SF-140 Скачать руководство пользователя страница 4

IMPORTANT SAFETY INSTRUCTIONS

4

Top Innovations

10.

 If red Power Indicator Light does not illuminate when unit is plugged in and Foot-Controlled 

      On/Off Switch is pressed, unit is not operating normally.  Immediately disconnect cord from 

      power supply, then refer to troubleshooting guide on Page 13 of this manual for assistance.

11.

 Turn unit off and unplug power cord before filling Boiler with water.

12.

 Do not use unit where aerosol-based products are being used, or where oxygen is being

      administered.

13.

 Unit is only meant to be used with recommended SF-140 accessories.  Using other types of

      attachments may cause damage to unit or injury.

14.

 When filling Boiler, only water should be used in unit - other cleaning agents could damage unit

      or cause injury.  Distilled or de-mineralized water is highly recommended, in order to minimize

      potential build-up of mineral deposits.  Do not overfill unit.

15.

 Do not attempt to use unit without properly filling Boiler with water.

16.

 To reduce risk of contact with hot water emitting from Steam Nozzle, check appliance before

      each use by positioning it away from body and turning it on.  Do not operate unit if Steam Nozzle  

      is blocked.

17.

 Burns can occur from touching hot metal parts, hot water, or steam.  Do not touch bottom of Mop

      Head or attempt to attach a Microfiber Cloth while unit is in use.  Use caution when you turn unit  

      upside-down – there may be hot water in Boiler.

18.

 When steaming any surface for the first time, it is recommended that you consult the

      manufacturer’s guidelines for material being steamed. For items in question, test on an

      inconspicuous area before proceeding.

19.

 Steaming unsealed floor surfaces, or exposing a single spot of a sealed surface to continuous 

      steam, is not recommended.  This may result in warping or damage to the surface.

20.

 Do not allow power cord to touch hot surfaces during use.  Wrap cord loosely around Cord

      Brackets when storing.

21.

 Always allow 

Steam Mop

 to cool completely (at least 30 minutes) and empty Boiler before

      storing.

SAVE THESE INSTRUCTIONS!

FOR HOUSEHOLD USE ONLY

Содержание MODEL SF-140

















Отзывы: