55
www.steamax.com
TFV12 PRINCE CLEAROMIZER – USING THE DEVICE
Changing the Atomizer Head
1. Remove the clearomizer from the battery / box mod of your e-cigarette.
2. Screw the head base from the glass tank, while the mouthpiece points to the ground.
3.
Remove the old atomizer head and insert a new one. Please first drip a few drops of
e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Connect all parts again and make sure that no e-liquid can leak.
5. Screw the clearomizer back to the battery / box mod.
Please note the Following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping. Please take several puffs without
activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled tank before use. Don’t clean atomizer
heads with water. Because atomizer coils are wearing parts, they must be changed regularly.