61
www.steamax.com
OLED Display
STEAMAX H-PRIV 2 – COMMISSIONING OF THE DEVICE
Operating Instructions
How to install the Batteries
Fully charge the necessary and replaceable 18650 batteries before first use. Please take note of the positive and
negative poles in the battery compartment. Ensure that there is no visible damage to the surface of the battery
cells. The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety of
sub-ohm-capable clearomizers.
Open the battery compartment by lightly pulling up the cover. Then place the charged 18650 batteries in the
device according to the poles indicated. Close the battery compartment.
Note:
If the display does not light up after switching the
device on, make sure that you have inserted the batteries
correctly and that they have sufficient power. If the device
still cannot be switched on despite fulfilling all the
aforementioned prerequisites, please contact our customer
service department.
