+44 (0) 1329 239 679
www.steam-e.com
GUM REMOVER
Operating Instructions - June 2018
Problem
Cause
Solution
There is no power
The battery is not charged
The battery is not connected
The switches are turned off
Charge the battery
Connect the battery
Turn both switches on
No fluid is coming from
the nozzle
There is no power
The switches are turned off
The fluid reservoir is empty
There is a loose connection in the tube
Charge the battery
Turn both switches on
Fill the fluid reservoir with clean cold water
Re-attach the heater and tube
Fluid is seen but there is
no steam
The Flow Switch is set to
TAP
There is a loose connection in the tube
Turn to
STEAM
Re-attach heater and all steam tubes
Troubleshooting
Consumables
NOTE:
If the problem persists, contact the distributor you purchased the machine from or email
quoting your serial number and nature of the problem.
Gum Removal Solution
Available from all approved Steam-e
®
distributors or directly from Steam-e
®
.
Each 90ml (3oz) bottle is diluted in the machines internal 3L (.79 Gallon) fluid reservoir and will last
approximately 5 hours on steam setting.
Brass brushes
Available from all approved Steam-e
®
distributors or directly from Steam-e
®
.
Nylon brushes
Available from all approved Steam-e
®
distributors or directly from Steam-e
®
.
Re-ordering consumables
To re-order any consumable items email:
or contact your distributor.