SV8D Quick Start Guide
Tel: 1300 79 50 50 E-mail:
Web: www.steamaustralia.com.au
2
3. Press and hold the
RED
steam button (
S
)
to select
between 3 steam levels: low, medium or high. The
steam level lights (
g
) display will light up in
correspondence to the different steam levels:
1
= Low,
2
= Medium and
3
= High.
4. Once you have selected which steam levels you
want, press the trigger located underneath the hose
handle (
T
)
to release steam from the nozzle.
WARNING: Do NOT operate hose with steam nozzle
pointing at persons, animals or electrical machinery
/equipment/outlets/sensors that are sensitive to
water and heat (especially near fire alarm sensors).
Vacuum Functions:
1. Press the BLACK & WHITE vacuum button (
V
)
to
engage the vacuum function. The vacuum will turn on
and you will feel suction from the vacuum nozzle.
2. If the vacuum stops, a beeping noise is heard and the
vacuum waste tank lights (
b
) flashes, check for any
water present in the waste tank. Remove any water
present and proceed to Step 2 & 3
of “Preparing the
SV8D | Vacuum Operations”
(
page 1
).
3. Press and hold the BLACK & WHITE vacuum button
(
V
)
to select 3 vacuum levels: low, medium or high. The
vacuum level lights display will light up in
correspondence to the different vacuum levels:
1
=
Low,
2
= Medium and
3
= High.
Detergent Functions:
1. The detergent function only works when the steam
function is active. Detergent gets injected periodically
together with steam when it is activated.
2. To activate the detergent function, press the
GREEN
detergent (
L
)
button on the hose. The detergent light
(
e
) will light up on the display.
3. If the SV8D makes a beeping noise and the
‘Low
Detergent
’
light (
a
) flashes on the display, proceed to
Step 1
–
3 of “Preparing the SV8D | Detergent
Operations”
(
page 1
).
4. Once the detergent function activates, use the
steam functions as normal. Periodically you will notice
a pulse in steam intensity at any steam level settings.
Warning Lights
The SV8D will make a beeping noise and a red light will
flash on certain conditions:
- Water tank low level (
c
- Vacuum waste tank no water/
too much waste (
b
)
- Detergent tank low level (
a
)
For water tank low level, refer to Step 2
of “Preparing the SV8D | Steam Operations”.
For vacuum waste tank issues, clean out the waste tank
and proceed to Step 2 & 3 of “Preparing the SV8D |
Vacuum Operations”.
For detergent tank low level, proceed to Step 1
–
3 of
“Preparing the SV8D|Detergent Operations”
(
page 1
).
Cleaning the SV8D
Draining the SV8D
’s boiler once a month ensures that
the machine operates at optimal conditions.
WARNING: Ensure machine has cooled down before
attempting to clean out the boiler by checking that
the machine doe
sn’t
feel warm on the bottom part
and machine is free from any pressure.
You will need:
- A pan or container that can hold at least 5L of water
- A rag
- Flathead screwdriver
- Supplied socket wrench
1. Ensure the machine isn’t p
lugged into a power
source
and the machine doesn’t feel wa
rm with no
pressure present.
2. Using a flathead screwdriver, remove the black
plastic cover concealing the boiler drain plug located
underneath the SV8D by inserting the screwdriver into
the slit and turning counter-clockwise.
3. Once the brass boiler plug is exposed, prepare the
SV8D by positioning it on top of a pan or container.
4. Using the supplied socket wrench, unscrew the
boiler plug by slowly turning counter-clockwise. You
may need to use a rag to
hold the plug as you
unscrew the plug by hand
after loosening using the
socket wrench. Let the
water drain, then screw the
plug back on and tighten
with
supplied
socket
wrench.
