Continued on Next Page
SB-T-FJ/12W1v3_INSTR_SKU#011226
S T E P 7
Remove the factory “woofer” system or the pocket from the
vehicle.
Vehicles without the factory “woofer” system, remove the
access panel that is located on the wheel well.
S T E P 6
Remove the upper right mounting bolt.
S T E P 5
Remove the upper left mounting bolt.
S T E P 4
Loosen the four exposed screws and remove the grille panel.
L-BRACKET
8mm FLAT WASHER
STEALTHBOX WALL
THREADED INSERT
8mm BOLT
SPACER
8mm LOCK WASHER
Page 2 • JL Audio, Inc 2016
S T E P 9
Place the Stealthbox onto passenger’s side rear wheel well.
Place a supplied 6mm lock washer and 6mm flat washer
onto each of the supplied 6mm x 40mm bolts.
From inside the Stealthbox®, place one of the bolt assemblies
through the left mounting hole that is located on the rear
wall of the Stealthbox®.
S T E P 1 1
Place the supplied pair of threaded studs into the 3 o’clock
and 9 o’clock position of the woofer’s mounting screw
locations. Leave about 1 1/2-inch exposed. As seen the
picture to the left.
Reconnect the speaker wires from inside the Stealthbox®
back onto the woofer’s terminal.
Place the woofer into the mounting hole, using the threaded
studs as guides. Mount the woofer using the mounting
screws that were removed in STEP 8. Remove the threaded
studs and secure the remaining pair of mounting screws.
S T E P 1 0
From inside the Stealthbox®, place the other bolt assembly
through the right mounting hole that is located on the rear
wall of the Stealthbox®.
Secure both bolt assemblies.
S T E P 8
With hand tools, unscrew the woofer’s mounting screws.
Disconnect the speaker wire from woofer and remove from
the woofer from the Stealthbox®.
Place a supplied 8mm lock washer, 8mm flat washer,
L-bracket and spacer onto each of the supplied 8mm bolts.
Place the shorter length leg of the L-bracket onto the
8mm bolt.
Secure each bolt assembly onto the bottom of the
Stealthbox®. The longer length leg of each L-bracket is to be
positioned toward the front of the Stealthbox®.
