SB-GM-EQNX/10W1v2/BK INSTR_SKU# 011318
S T E P 1 5
Reinstall the side panel, tow hooks, sill panels,
weatherstripping, and floor.
S T E P 1 4
Pictured is the Stealthbox® mounted in place.
S T E P 1 3
Attach the two Lower Brackets to the Stealthbox® as shown
using a 1/4” Flat Washer, 1/4” Lock Washer, and a 6mm x
25mm Bolt on each, and firmly tighten.
S T E P 1 2
Attach the speaker wire to the Stealthbox®, set the enclosure
back in place, and firmly tighten the factory nuts on the
upper threaded studs.
Page 3 • JL Audio, Inc 2010
S T E P 1 6
C O N G R A T U L A T I O N S !
You have completed the installation for this model!
Enjoy your new Stealthbox®!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
Continued on Next Page
